Contact

Products

Fiber filter media (Acty Fiber)

Features

Actyfiber has the following features because it has a very large void ratio and surface area.

Reduction of installation space

Since the filtration speed can be increased by about 5 times compared to the granular filter material, the size of the filtration tower can be reduced and the installation space can be reduced.

Large amount of turbidity captured

The void ratio is 90% or more (oversand and anthracite is around 50%), and since a large amount of fibers of several tens of μm is used, the surface area is large, and the amount of turbidity trapped is larger than that of granular filter media. I can.

Reduction of washing water amount

Simultaneous cleaning of strong air and water is adopted for cleaning, and a large cleaning effect can be obtained with a small amount of cleaning water.

Use

AF-R: For circulation and wastewater filtration

● SS filtration of various wastewaters (SS removal such as collection and precipitation, pressure flotation treatment, etc.)
● Various coarse filtration

AF-P: For water purification and water filtration

● Decontamination of river water (turbidity measures)
● Decontamination of industrial water
● Removal of iron in groundwater (removal of concentrated iron)

Specification

AF-R for circulation _and drainage AF-P for water purification _and water filtration
Material polypropylene(PP) polypropylene(PP)
Filter material diameter Φ 120mm Φ 120mm
Nominal length 1000mm、1500mm 1000mm、1500mm
Differential pressure used 0.1MPa less 0.1MPa less
Operating temperature 40℃ less 40℃ less

Head Office

1-12-11 Tagawakita, Yodogawa-ku,Osaka
532-0021

Overseas Business Department

TEL +81-6-6301-6460
FAX +81-6-6308-3022