Filtration materials for waterprocessing,Chemical Pump,water measure,Mixer general maker of the water processing machinery
Filter Media for Water Treatment
Manganese Sand
?Manganese can be removed from raw water by dosing chlorine into raw water containing manganese and making the water contact to filter media coated with manganese. This method is commonly called as ?to remove manganese by manganese? utilizing catalysis of manganese. Manganese Sand is used in case of much manganese content in raw water at tap water treatment facilities such as waterworks.
Standard products of our Manganese Sand
| Products | MS0 | MS1 | MS2 | Size regulations (JWWA A103-3:2006-2) |
|---|---|---|---|---|
| Effective Size | 0.35mm | 0.50mm | 0.60mm | 0.45 to 0.7mm |
| Uniformity Coefficient | 1.5 maximum | 1.7 maximum | ||
| Specific gravity | 2.58 to 2.65g/cm3 | 2.57 to 2.67g/cm3 | ||
| Manganese content | 0.5mg/g minimum | 0.3mg/g minimum | ||
| Appearance | Granular | - | ||
| Matrix | Filter Sand | - | ||
This product conforms to the selecting standard of Manganese Sand for tap water use (JWWA A103-3:2006-2).
Note: At your request, we can manufacture Manganese Sand of other Effective Sizes and Uniformity Coefficient. Please understand that there are tolerances included in the above Effective Sizes.
Packing: 20L in a PE bag, 0.6m3 in a flexible container bag (Palletizing available)
